用的完整指南)
aclnnBidirectionLSTM雙向LSTM算子從原理到調用的完整指南【免費下載鏈接】ops-nn本項目是CANN提供的神經網絡類計算算子庫實現網絡在NPU上加速計算。項目地址: https://gitcode.com/cann/ops-nnaclnnBidirectionLSTM是 CANN 算子庫中面向 Ascend NPU 的循環神經網絡算子位于 ops-nn 的 rnn 分類下。它接收輸入序列與初始隱藏/cell 狀態完成雙向長短時記憶LSTM的前向推演返回各時刻隱藏狀態與序列末端的 cell 狀態常用于文本等序列數據的建模與推理。計算原理雙向LSTM算子調用的門控機制LSTM 屬于循環神經網絡家族中的一種變體通過門來調控信息在時間步之間的流動。該算子負責把整段序列按時間步逐步展開每個時間步都用四組門控參數對上一時刻狀態和當前輸入做加權組合再疊加偏置后過激活函數從而更新隱藏狀態與 cell 狀態開啟雙向bidirection時會同時做正向與逆向兩條推演把兩路輸出在特征維上拼接。單個時間步 $t$ 的遞推關系如下$$ f_t \mathrm{sigm}(W_f [h_{t-1}, x_t] b_f) \ i_t \mathrm{sigm}(W_i [h_{t-1}, x_t] b_i) \ o_t \mathrm{sigm}(W_o [h_{t-1}, x_t] b_o) \ \tilde{c}t \tanh(W_c [h_{t-1}, x_t] b_c) \ c_t f_t \odot c{t-1} i_t \odot \tilde{c}t \ c{o}^{t} \tanh(c_t) \ h_t o_t \odot c_{o}^{t} $$各符號含義逐條說明$x_t \in R^gv5xshg9wyt$對應公式里 $x_t$ 項LSTM 單元的輸入向量即當前時間步喂進來的特征。$f_t \in (0, 1)^{h}$對應公式里 $f_t$ 項遺忘門激活向量決定保留多少上一時刻 cell 狀態。$i_t \in (0, 1)^{h}$對應公式里 $i_t$ 項輸入門更新門激活向量決定寫入多少新信息。$o_t \in (0, 1)^{h}$對應公式里 $o_t$ 項輸出門激活向量控制 cell 狀態向隱藏狀態的放行比例。$h_i \in (-1, 1)^{h}$隱藏狀態向量也就是該時刻 LSTM 單元對外輸出的向量。$\tilde{c}_t \in (-1, 1)^{h}$cell 輸入激活向量經 tanh 約束后的候選新?tīng)顟B(tài)。$c_t \in R^{h}$cell 狀態向量沿時間步累積的長期記憶。$W \in R^{h\times d}$$(U \in R^{h\times h}) \cap (b \in R^{h})$訓練階段需要學習的權重矩陣與偏置向量參數。硬件適配一覽該算子目前僅覆蓋 Atlas 推理系列產品其余主流訓練/推理系列均不在支持范圍內。支持狀態以 ? 表示可用、以 × 表示不可用下表將可用項前置便于快速核對。產品系列支持狀態補充說明Atlas 推理系列產品?當前唯一可用產品線Ascend 950PR / Ascend 950DT×不支持Atlas A3 訓練/推理系列產品×不支持Atlas A2 訓練/推理系列產品×不支持Atlas 200I / 500 A2 推理產品×不支持Atlas 訓練系列產品×不支持調用時序與接口定義aclnn 兩段式接口aclnnBidirectionLSTM遵循 CANN 算子的 aclnn 兩段式接口規范先由aclnnBidirectionLSTMGetWorkspaceSize完成入?yún)⑿ｒ?yàn)并算出所需 CANN 算子 workspace 的大小、返回執行器再由aclnnBidirectionLSTM攜帶 workspace 與執行器真正下發計算。兩段之間不允許插入其他算子調用。文字時序可概括為應用側 CANN 算子 |--- aclnnBidirectionLSTMGetWorkspaceSize(入?yún)? --| 校驗 shape / 類型 / 屬性 |-- workspaceSize executor ----------------------| | 按 workspaceSize 在 device 側申請內存 | |--- aclnnBidirectionLSTM(workspace, executor, stream) --| 執行雙向 LSTM 前向 |-- aclnnStatus ------------------------------------|aclnnBidirectionLSTMGetWorkspaceSize函數原型aclnnStatus aclnnBidirectionLSTMGetWorkspaceSize( const aclTensor *x, const aclTensor *initH, const aclTensor *initC, const aclTensor *wIh, const aclTensor *wHh, const aclTensor *bIhOptional, const aclTensor *bHhOptional, const aclTensor *wIhReverseOptional, const aclTensor *wHhReverseOptional, const aclTensor *bIhReverseOptional, const aclTensor *bHhReverseOptional, int64_t numLayers, bool isbias, bool batchFirst, bool bidirection, const aclTensor *yOut, const aclTensor *outputHOut, const aclTensor *outputCOut, uint64_t *workspaceSize, aclOpExecutor **executor)參數一覽參數名方向類型Shape / 取值說明x輸入aclTensor*(time_step, batch_size, input_size)3 維對應公式中 $x$ 的輸入向量支持空 TensorFLOAT16ND支持非連續initH輸入aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維初始化 hidden 狀態即公式中 $h$支持空 TensorFLOAT16ND支持非連續initC輸入aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維初始化 cell 狀態即公式中 $c$支持空 TensorFLOAT16ND支持非連續wIh輸入aclTensor*(4*hidden_size, input_size)2 維input-hidden 權重即公式中 $W$支持空 TensorFLOAT16ND支持非連續wHh輸入aclTensor*(4*hidden_size, hidden_size)2 維hidden-hidden 權重即公式中 $W$支持空 TensorFLOAT16ND支持非連續bIhOptional輸入aclTensor*(4*hidden_size)1 維input-hidden 偏置即公式中 $b$支持空 TensorFLOAT16ND支持非連續bHhOptional輸入aclTensor*(4*hidden_size)1 維hidden-hidden 偏置即公式中 $b$支持空 TensorFLOAT16ND支持非連續wIhReverseOptional輸入aclTensor*(4*hidden_size, input_size)2 維逆向 input-hidden 權重支持空 TensorFLOAT16ND支持非連續wHhReverseOptional輸入aclTensor*(4*hidden_size, input_size)2 維逆向 hidden-hidden 權重支持空 TensorFLOAT16ND支持非連續bIhReverseOptional輸入aclTensor*(4*hidden_size)1 維逆向 input-hidden 偏置支持空 TensorFLOAT16ND支持非連續bHhReverseOptional輸入aclTensor*(4*hidden_size)1 維逆向 hidden-hidden 偏置支持空 TensorFLOAT16ND支持非連續numLayers輸入int64_t當前僅支持 1LSTM 層數isbias輸入booltrue / false是否帶 biasbatchFirst輸入bool當前僅支持 falsebatch 是否位于首維bidirection輸入booltrue / false是否雙向yOut輸出aclTensor*(time_step, batch_size, hidden_size)雙向時 (time_step, batch_size, 2*hidden_size)3 維LSTM 單元輸出向量FLOAT16ND支持非連續outputHOut輸出aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維最終 hidden 狀態即公式中 $h$FLOAT16ND支持非連續outputCOut輸出aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維最終 cell 狀態即公式中 $c$FLOAT16ND支持非連續workspaceSize輸出uint64_t*-返回需在 device 側申請的 workspace 大小executor輸出aclOpExecutor**-返回 op 執行器封裝算子計算流程返回值為aclnnStatus狀態碼。第一段接口會完成入?yún)⑿ｒ?yàn)觸發報錯的典型場景見下文錯誤碼速查。aclnnBidirectionLSTM函數原型aclnnStatus aclnnBidirectionLSTM( void *workspace, uint64_t workspaceSize, aclOpExecutor *executor, aclrtStream stream)參數一覽參數名方向類型說明workspace輸入void*在 device 側申請的 workspace 內存地址workspaceSize輸入uint64_t在 device 側申請的 workspace 大小由第一段接口返回executor輸入aclOpExecutor*op 執行器封裝算子計算流程stream輸入aclrtStream指定執行任務的 Stream返回值為aclnnStatus狀態碼成功時對應 ACL_SUCCESS。錯誤碼速查第一段接口aclnnBidirectionLSTMGetWorkspaceSize在入?yún)⑿ｒ?yàn)階段可能返回下列狀態碼均對應aclnnStatus。常量名數字碼觸發條件ACLNN_ERR_PARAM_NULLPTR161001傳入的必選輸入、必選輸出或必選屬性為空指針ACLNN_ERR_PARAM_INVALID161002傳入的 aclTensor 數據類型不在支持范圍本算子僅 FLOAT16ACLNN_ERR_INNER_TILING_ERROR561002傳入的 aclTensor shape 與上文參數說明不符約束與限制??numLayers當前只支持 1層數無法通過該參數疊加。??batchFirst當前只支持 false即時間步必須位于首維若傳入 true 會觸發 tiling 階段錯誤。全部張量數據類型僅支持 FLOAT16數據格式為 ND。雙向模式下initH / initC / outputHOut / outputCOut 的首維為2 * num_layersyOut 的特征維為2 * hidden_size正向模式下均為num_layers與hidden_size。確定性aclnnBidirectionLSTM默認即為確定性實現無需額外開關。各輸入張量與 yOut / outputHOut / outputCOut 均允許非連續布局也允許以空 Tensor 傳入。完整調用示例CANN 算子 workspace 的申請與執行下面示例演示了從初始化 device、構造輸入輸出張量到調用兩段式接口、同步與釋放資源的完整鏈路。代碼僅為調用流程參考編譯與鏈接細節請以官方文檔為準。#include iostream #include vector #include acl/acl.h #include aclnnop/aclnn_bidirection_lstm.h #define CHECK_RET(cond, return_expr) \ do { \ if (!(cond)) { \ return_expr; \ } \ } while (0) #define LOG_PRINT(message, ...) \ do { \ printf(message, ##__VA_ARGS__); \ } while (0) int64_t GetShapeSize(const std::vectorint64_t shape) { int64_t shapeSize 1; for (auto i : shape) { shapeSize * i; } return shapeSize; } template typename T int CreateAclTensor(const std::vectorT hostData, const std::vectorint64_t shape, void** deviceAddr, aclDataType dataType, aclTensor** tensor) { auto size GetShapeSize(shape) * sizeof(T); auto ret aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtMalloc failed. ERROR: %d\n, ret); return ret); ret aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtMemcpy failed. ERROR: %d\n, ret); return ret); std::vectorint64_t strides(shape.size(), 1); for (int64_t i shape.size() - 2; i 0; i--) { strides[i] shape[i 1] * strides[i 1]; } *tensor aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND, shape.data(), shape.size(), *deviceAddr); return 0; } int Init(int32_t deviceId, aclrtStream* stream) { auto ret aclInit(nullptr); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclInit failed. ERROR: %d\n, ret); return ret); ret aclrtSetDevice(deviceId); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtSetDevice failed. ERROR: %d\n, ret); return ret); ret aclrtCreateStream(stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtCreateStream failed. ERROR: %d\n, ret); return ret); return 0; } int main() { int32_t deviceId 0; aclrtStream stream; auto ret Init(deviceId, stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(Init acl failed. ERROR: %d\n, ret); return ret); int time_step 2, batch_size 32, input_size 32, hidden_size 32; int64_t numLayers 1; bool isbias true, batchFirst false, bidirection true; std::vectorint64_t selfShape {time_step, batch_size, input_size}; std::vectorint64_t weightHIShape {4 * hidden_size, input_size}; std::vectorint64_t weightHHShape {4 * hidden_size, hidden_size}; std::vectorint64_t initHShape {2, batch_size, hidden_size}; std::vectorint64_t initCShape {2, batch_size, hidden_size}; std::vectorint64_t biasHIShape {4 * hidden_size}; std::vectorint64_t biasHHShape {4 * hidden_size}; std::vectorint64_t outShape {time_step, batch_size, 2 * hidden_size}; std::vectorint64_t outHShape {2, batch_size, hidden_size}; std::vectorint64_t outCShape {2, batch_size, hidden_size}; void* selfDeviceAddr nullptr; void* weightHIDeviceAddr nullptr; void* weightHHDeviceAddr nullptr; void* weightHIReverseDeviceAddr nullptr; void* weightHHReverseDeviceAddr nullptr; void* initHDeviceAddr nullptr; void* initCDeviceAddr nullptr; void* biasHIDeviceAddr nullptr; void* biasHHDeviceAddr nullptr; void* biasHIReverseDeviceAddr nullptr; void* biasHHReverseDeviceAddr nullptr; void* outDeviceAddr nullptr; void* outHDeviceAddr nullptr; void* outCDeviceAddr nullptr; aclTensor* self nullptr; aclTensor* weightHI nullptr; aclTensor* weightHH nullptr; aclTensor* weightHIReverse nullptr; aclTensor* weightHHReverse nullptr; aclTensor* biasHI nullptr; aclTensor* biasHH nullptr; aclTensor* biasHIReverse nullptr; aclTensor* biasHHReverse nullptr; aclTensor* initH nullptr; aclTensor* initC nullptr; aclTensor* out nullptr; aclTensor* outH nullptr; aclTensor* outC nullptr; std::vectoruint16_t selfHostData(GetShapeSize(selfShape)); std::vectoruint16_t weightHIHostData(GetShapeSize(weightHIShape)); std::vectoruint16_t weightHHHostData(GetShapeSize(weightHHShape)); std::vectoruint16_t biasHIHostData(GetShapeSize(biasHIShape)); std::vectoruint16_t biasHHHostData(GetShapeSize(biasHHShape)); std::vectoruint16_t initHHostData(GetShapeSize(initHShape)); std::vectoruint16_t initCHostData(GetShapeSize(initCShape)); std::vectoruint16_t outHostData(GetShapeSize(outShape)); std::vectoruint16_t outHHostData(GetShapeSize(outHShape)); std::vectoruint16_t outCHostData(GetShapeSize(outCShape)); ret CreateAclTensor(selfHostData, selfShape, selfDeviceAddr, aclDataType::ACL_FLOAT16, self); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHIHostData, weightHIShape, weightHIDeviceAddr, aclDataType::ACL_FLOAT16, weightHI); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHHHostData, weightHHShape, weightHHDeviceAddr, aclDataType::ACL_FLOAT16, weightHH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(initHHostData, initHShape, initHDeviceAddr, aclDataType::ACL_FLOAT16, initH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(initCHostData, initCShape, initCDeviceAddr, aclDataType::ACL_FLOAT16, initC); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHIHostData, biasHIShape, biasHIDeviceAddr, aclDataType::ACL_FLOAT16, biasHI); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHHHostData, biasHHShape, biasHHDeviceAddr, aclDataType::ACL_FLOAT16, biasHH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHIHostData, weightHIShape, weightHIReverseDeviceAddr, aclDataType::ACL_FLOAT16, weightHIReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHHHostData, weightHHShape, weightHHReverseDeviceAddr, aclDataType::ACL_FLOAT16, weightHHReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHIHostData, biasHIShape, biasHIReverseDeviceAddr, aclDataType::ACL_FLOAT16, biasHIReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHHHostData, biasHHShape, biasHHReverseDeviceAddr, aclDataType::ACL_FLOAT16, biasHHReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(outHostData, outShape, outDeviceAddr, aclDataType::ACL_FLOAT16, out); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(outHHostData, outHShape, outHDeviceAddr, aclDataType::ACL_FLOAT16, outH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(outCHostData, outCShape, outCDeviceAddr, aclDataType::ACL_FLOAT16, outC); CHECK_RET(ret ACL_SUCCESS, return ret); uint64_t workspaceSize 0; aclOpExecutor* executor nullptr; ret aclnnBidirectionLSTMGetWorkspaceSize(self, initH, initC, weightHI, weightHH, biasHI, biasHH, weightHIReverse, weightHHReverse, biasHIReverse, biasHHReverse, numLayers, isbias, batchFirst, bidirection, out, outH, outC, workspaceSize, executor); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclnnBidirectionLSTMGetWorkspaceSize failed. ERROR: %d\n, ret); return ret); void* workspaceAddr nullptr; if (workspaceSize 0) { ret aclrtMalloc(workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(allocate workspace failed. ERROR: %d\n, ret); return ret); } ret aclnnBidirectionLSTM(workspaceAddr, workspaceSize, executor, stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclnnBidirectionLSTM failed. ERROR: %d\n, ret); return ret); ret aclrtSynchronizeStream(stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtSynchronizeStream failed. ERROR: %d\n, ret); return ret); aclDestroyTensor(self); aclDestroyTensor(weightHI); aclDestroyTensor(weightHH); aclDestroyTensor(initH); aclDestroyTensor(initC); aclDestroyTensor(biasHI); aclDestroyTensor(biasHH); aclDestroyTensor(weightHIReverse); aclDestroyTensor(weightHHReverse); aclDestroyTensor(biasHIReverse); aclDestroyTensor(biasHHReverse); aclDestroyTensor(out); aclDestroyTensor(outH); aclDestroyTensor(outC); aclrtFree(selfDeviceAddr); aclrtFree(weightHIDeviceAddr); aclrtFree(weightHHDeviceAddr); aclrtFree(initHDeviceAddr); aclrtFree(initCDeviceAddr); aclrtFree(biasHIDeviceAddr); aclrtFree(biasHHDeviceAddr); aclrtFree(weightHIReverseDeviceAddr); aclrtFree(weightHHReverseDeviceAddr); aclrtFree(biasHIReverseDeviceAddr); aclrtFree(biasHHReverseDeviceAddr); aclrtFree(outDeviceAddr); aclrtFree(outHDeviceAddr); aclrtFree(outCDeviceAddr); if (workspaceSize 0) { aclrtFree(workspaceAddr); } aclrtDestroyStream(stream); aclrtResetDevice(deviceId); aclFinalize(); return 0; }延伸閱讀算子文檔aclnnBidirectionLSTM.md與本文信息保持一致適合交叉核對參數約束。反向/雙向前向 kernel 實現op_kernel 目錄其中 lstm_bidir_fp16.h 給出了 FP16 雙向前向的底層組織。tiling 與 op 注冊入口bidirection_lstm.h可幫助理解 shape 校驗與 workspace 估算的來源?？删幾g的運行樣例test_aclnn_bidirection_lstm.cpp?！久赓M(fèi)下載鏈接】ops-nn本項目是CANN提供的神經網絡類計算算子庫實現網絡在NPU上加速計算。項目地址: https://gitcode.com/cann/ops-nn創作聲明：本文部分內容由AI輔助生成（AIGC），僅供參考 aclnnBidirectionLSTM：雙向LSTM算子從原理到調用的完整指南
aclnnBidirectionLSTM雙向LSTM算子從原理到調用的完整指南【免費下載鏈接】ops-nn本項目是CANN提供的神經網絡類計算算子庫實現網絡在NPU上加速計算。項目地址: https://gitcode.com/cann/ops-nnaclnnBidirectionLSTM是 CANN 算子庫中面向 Ascend NPU 的循環神經網絡算子位于 ops-nn 的 rnn 分類下。它接收輸入序列與初始隱藏/cell 狀態完成雙向長短時記憶LSTM的前向推演返回各時刻隱藏狀態與序列末端的 cell 狀態常用于文本等序列數據的建模與推理。計算原理雙向LSTM算子調用的門控機制LSTM 屬于循環神經網絡家族中的一種變體通過門來調控信息在時間步之間的流動。該算子負責把整段序列按時間步逐步展開每個時間步都用四組門控參數對上一時刻狀態和當前輸入做加權組合再疊加偏置后過激活函數從而更新隱藏狀態與 cell 狀態開啟雙向bidirection時會同時做正向與逆向兩條推演把兩路輸出在特征維上拼接。單個時間步 $t$ 的遞推關系如下$$ f_t \mathrm{sigm}(W_f [h_{t-1}, x_t] b_f) \ i_t \mathrm{sigm}(W_i [h_{t-1}, x_t] b_i) \ o_t \mathrm{sigm}(W_o [h_{t-1}, x_t] b_o) \ \tilde{c}t \tanh(W_c [h_{t-1}, x_t] b_c) \ c_t f_t \odot c{t-1} i_t \odot \tilde{c}t \ c{o}^{t} \tanh(c_t) \ h_t o_t \odot c_{o}^{t} $$各符號含義逐條說明$x_t \in R^gv5xshg9wyt$對應公式里 $x_t$ 項LSTM 單元的輸入向量即當前時間步喂進來的特征。$f_t \in (0, 1)^{h}$對應公式里 $f_t$ 項遺忘門激活向量決定保留多少上一時刻 cell 狀態。$i_t \in (0, 1)^{h}$對應公式里 $i_t$ 項輸入門更新門激活向量決定寫入多少新信息。$o_t \in (0, 1)^{h}$對應公式里 $o_t$ 項輸出門激活向量控制 cell 狀態向隱藏狀態的放行比例。$h_i \in (-1, 1)^{h}$隱藏狀態向量也就是該時刻 LSTM 單元對外輸出的向量。$\tilde{c}_t \in (-1, 1)^{h}$cell 輸入激活向量經 tanh 約束后的候選新?tīng)顟B(tài)。$c_t \in R^{h}$cell 狀態向量沿時間步累積的長期記憶。$W \in R^{h\times d}$$(U \in R^{h\times h}) \cap (b \in R^{h})$訓練階段需要學習的權重矩陣與偏置向量參數。硬件適配一覽該算子目前僅覆蓋 Atlas 推理系列產品其余主流訓練/推理系列均不在支持范圍內。支持狀態以 ? 表示可用、以 × 表示不可用下表將可用項前置便于快速核對。產品系列支持狀態補充說明Atlas 推理系列產品?當前唯一可用產品線Ascend 950PR / Ascend 950DT×不支持Atlas A3 訓練/推理系列產品×不支持Atlas A2 訓練/推理系列產品×不支持Atlas 200I / 500 A2 推理產品×不支持Atlas 訓練系列產品×不支持調用時序與接口定義aclnn 兩段式接口aclnnBidirectionLSTM遵循 CANN 算子的 aclnn 兩段式接口規范先由aclnnBidirectionLSTMGetWorkspaceSize完成入?yún)⑿ｒ?yàn)并算出所需 CANN 算子 workspace 的大小、返回執行器再由aclnnBidirectionLSTM攜帶 workspace 與執行器真正下發計算。兩段之間不允許插入其他算子調用。文字時序可概括為應用側 CANN 算子 |--- aclnnBidirectionLSTMGetWorkspaceSize(入?yún)? --| 校驗 shape / 類型 / 屬性 |-- workspaceSize executor ----------------------| | 按 workspaceSize 在 device 側申請內存 | |--- aclnnBidirectionLSTM(workspace, executor, stream) --| 執行雙向 LSTM 前向 |-- aclnnStatus ------------------------------------|aclnnBidirectionLSTMGetWorkspaceSize函數原型aclnnStatus aclnnBidirectionLSTMGetWorkspaceSize( const aclTensor *x, const aclTensor *initH, const aclTensor *initC, const aclTensor *wIh, const aclTensor *wHh, const aclTensor *bIhOptional, const aclTensor *bHhOptional, const aclTensor *wIhReverseOptional, const aclTensor *wHhReverseOptional, const aclTensor *bIhReverseOptional, const aclTensor *bHhReverseOptional, int64_t numLayers, bool isbias, bool batchFirst, bool bidirection, const aclTensor *yOut, const aclTensor *outputHOut, const aclTensor *outputCOut, uint64_t *workspaceSize, aclOpExecutor **executor)參數一覽參數名方向類型Shape / 取值說明x輸入aclTensor*(time_step, batch_size, input_size)3 維對應公式中 $x$ 的輸入向量支持空 TensorFLOAT16ND支持非連續initH輸入aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維初始化 hidden 狀態即公式中 $h$支持空 TensorFLOAT16ND支持非連續initC輸入aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維初始化 cell 狀態即公式中 $c$支持空 TensorFLOAT16ND支持非連續wIh輸入aclTensor*(4*hidden_size, input_size)2 維input-hidden 權重即公式中 $W$支持空 TensorFLOAT16ND支持非連續wHh輸入aclTensor*(4*hidden_size, hidden_size)2 維hidden-hidden 權重即公式中 $W$支持空 TensorFLOAT16ND支持非連續bIhOptional輸入aclTensor*(4*hidden_size)1 維input-hidden 偏置即公式中 $b$支持空 TensorFLOAT16ND支持非連續bHhOptional輸入aclTensor*(4*hidden_size)1 維hidden-hidden 偏置即公式中 $b$支持空 TensorFLOAT16ND支持非連續wIhReverseOptional輸入aclTensor*(4*hidden_size, input_size)2 維逆向 input-hidden 權重支持空 TensorFLOAT16ND支持非連續wHhReverseOptional輸入aclTensor*(4*hidden_size, input_size)2 維逆向 hidden-hidden 權重支持空 TensorFLOAT16ND支持非連續bIhReverseOptional輸入aclTensor*(4*hidden_size)1 維逆向 input-hidden 偏置支持空 TensorFLOAT16ND支持非連續bHhReverseOptional輸入aclTensor*(4*hidden_size)1 維逆向 hidden-hidden 偏置支持空 TensorFLOAT16ND支持非連續numLayers輸入int64_t當前僅支持 1LSTM 層數isbias輸入booltrue / false是否帶 biasbatchFirst輸入bool當前僅支持 falsebatch 是否位于首維bidirection輸入booltrue / false是否雙向yOut輸出aclTensor*(time_step, batch_size, hidden_size)雙向時 (time_step, batch_size, 2*hidden_size)3 維LSTM 單元輸出向量FLOAT16ND支持非連續outputHOut輸出aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維最終 hidden 狀態即公式中 $h$FLOAT16ND支持非連續outputCOut輸出aclTensor*(num_layers, batch_size, hidden_size)雙向時 (2*num_layers, ...)3 維最終 cell 狀態即公式中 $c$FLOAT16ND支持非連續workspaceSize輸出uint64_t*-返回需在 device 側申請的 workspace 大小executor輸出aclOpExecutor**-返回 op 執行器封裝算子計算流程返回值為aclnnStatus狀態碼。第一段接口會完成入?yún)⑿ｒ?yàn)觸發報錯的典型場景見下文錯誤碼速查。aclnnBidirectionLSTM函數原型aclnnStatus aclnnBidirectionLSTM( void *workspace, uint64_t workspaceSize, aclOpExecutor *executor, aclrtStream stream)參數一覽參數名方向類型說明workspace輸入void*在 device 側申請的 workspace 內存地址workspaceSize輸入uint64_t在 device 側申請的 workspace 大小由第一段接口返回executor輸入aclOpExecutor*op 執行器封裝算子計算流程stream輸入aclrtStream指定執行任務的 Stream返回值為aclnnStatus狀態碼成功時對應 ACL_SUCCESS。錯誤碼速查第一段接口aclnnBidirectionLSTMGetWorkspaceSize在入?yún)⑿ｒ?yàn)階段可能返回下列狀態碼均對應aclnnStatus。常量名數字碼觸發條件ACLNN_ERR_PARAM_NULLPTR161001傳入的必選輸入、必選輸出或必選屬性為空指針ACLNN_ERR_PARAM_INVALID161002傳入的 aclTensor 數據類型不在支持范圍本算子僅 FLOAT16ACLNN_ERR_INNER_TILING_ERROR561002傳入的 aclTensor shape 與上文參數說明不符約束與限制??numLayers當前只支持 1層數無法通過該參數疊加。??batchFirst當前只支持 false即時間步必須位于首維若傳入 true 會觸發 tiling 階段錯誤。全部張量數據類型僅支持 FLOAT16數據格式為 ND。雙向模式下initH / initC / outputHOut / outputCOut 的首維為2 * num_layersyOut 的特征維為2 * hidden_size正向模式下均為num_layers與hidden_size。確定性aclnnBidirectionLSTM默認即為確定性實現無需額外開關。各輸入張量與 yOut / outputHOut / outputCOut 均允許非連續布局也允許以空 Tensor 傳入。完整調用示例CANN 算子 workspace 的申請與執行下面示例演示了從初始化 device、構造輸入輸出張量到調用兩段式接口、同步與釋放資源的完整鏈路。代碼僅為調用流程參考編譯與鏈接細節請以官方文檔為準。#include iostream #include vector #include acl/acl.h #include aclnnop/aclnn_bidirection_lstm.h #define CHECK_RET(cond, return_expr) \ do { \ if (!(cond)) { \ return_expr; \ } \ } while (0) #define LOG_PRINT(message, ...) \ do { \ printf(message, ##__VA_ARGS__); \ } while (0) int64_t GetShapeSize(const std::vectorint64_t shape) { int64_t shapeSize 1; for (auto i : shape) { shapeSize * i; } return shapeSize; } template typename T int CreateAclTensor(const std::vectorT hostData, const std::vectorint64_t shape, void** deviceAddr, aclDataType dataType, aclTensor** tensor) { auto size GetShapeSize(shape) * sizeof(T); auto ret aclrtMalloc(deviceAddr, size, ACL_MEM_MALLOC_HUGE_FIRST); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtMalloc failed. ERROR: %d\n, ret); return ret); ret aclrtMemcpy(*deviceAddr, size, hostData.data(), size, ACL_MEMCPY_HOST_TO_DEVICE); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtMemcpy failed. ERROR: %d\n, ret); return ret); std::vectorint64_t strides(shape.size(), 1); for (int64_t i shape.size() - 2; i 0; i--) { strides[i] shape[i 1] * strides[i 1]; } *tensor aclCreateTensor(shape.data(), shape.size(), dataType, strides.data(), 0, aclFormat::ACL_FORMAT_ND, shape.data(), shape.size(), *deviceAddr); return 0; } int Init(int32_t deviceId, aclrtStream* stream) { auto ret aclInit(nullptr); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclInit failed. ERROR: %d\n, ret); return ret); ret aclrtSetDevice(deviceId); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtSetDevice failed. ERROR: %d\n, ret); return ret); ret aclrtCreateStream(stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtCreateStream failed. ERROR: %d\n, ret); return ret); return 0; } int main() { int32_t deviceId 0; aclrtStream stream; auto ret Init(deviceId, stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(Init acl failed. ERROR: %d\n, ret); return ret); int time_step 2, batch_size 32, input_size 32, hidden_size 32; int64_t numLayers 1; bool isbias true, batchFirst false, bidirection true; std::vectorint64_t selfShape {time_step, batch_size, input_size}; std::vectorint64_t weightHIShape {4 * hidden_size, input_size}; std::vectorint64_t weightHHShape {4 * hidden_size, hidden_size}; std::vectorint64_t initHShape {2, batch_size, hidden_size}; std::vectorint64_t initCShape {2, batch_size, hidden_size}; std::vectorint64_t biasHIShape {4 * hidden_size}; std::vectorint64_t biasHHShape {4 * hidden_size}; std::vectorint64_t outShape {time_step, batch_size, 2 * hidden_size}; std::vectorint64_t outHShape {2, batch_size, hidden_size}; std::vectorint64_t outCShape {2, batch_size, hidden_size}; void* selfDeviceAddr nullptr; void* weightHIDeviceAddr nullptr; void* weightHHDeviceAddr nullptr; void* weightHIReverseDeviceAddr nullptr; void* weightHHReverseDeviceAddr nullptr; void* initHDeviceAddr nullptr; void* initCDeviceAddr nullptr; void* biasHIDeviceAddr nullptr; void* biasHHDeviceAddr nullptr; void* biasHIReverseDeviceAddr nullptr; void* biasHHReverseDeviceAddr nullptr; void* outDeviceAddr nullptr; void* outHDeviceAddr nullptr; void* outCDeviceAddr nullptr; aclTensor* self nullptr; aclTensor* weightHI nullptr; aclTensor* weightHH nullptr; aclTensor* weightHIReverse nullptr; aclTensor* weightHHReverse nullptr; aclTensor* biasHI nullptr; aclTensor* biasHH nullptr; aclTensor* biasHIReverse nullptr; aclTensor* biasHHReverse nullptr; aclTensor* initH nullptr; aclTensor* initC nullptr; aclTensor* out nullptr; aclTensor* outH nullptr; aclTensor* outC nullptr; std::vectoruint16_t selfHostData(GetShapeSize(selfShape)); std::vectoruint16_t weightHIHostData(GetShapeSize(weightHIShape)); std::vectoruint16_t weightHHHostData(GetShapeSize(weightHHShape)); std::vectoruint16_t biasHIHostData(GetShapeSize(biasHIShape)); std::vectoruint16_t biasHHHostData(GetShapeSize(biasHHShape)); std::vectoruint16_t initHHostData(GetShapeSize(initHShape)); std::vectoruint16_t initCHostData(GetShapeSize(initCShape)); std::vectoruint16_t outHostData(GetShapeSize(outShape)); std::vectoruint16_t outHHostData(GetShapeSize(outHShape)); std::vectoruint16_t outCHostData(GetShapeSize(outCShape)); ret CreateAclTensor(selfHostData, selfShape, selfDeviceAddr, aclDataType::ACL_FLOAT16, self); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHIHostData, weightHIShape, weightHIDeviceAddr, aclDataType::ACL_FLOAT16, weightHI); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHHHostData, weightHHShape, weightHHDeviceAddr, aclDataType::ACL_FLOAT16, weightHH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(initHHostData, initHShape, initHDeviceAddr, aclDataType::ACL_FLOAT16, initH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(initCHostData, initCShape, initCDeviceAddr, aclDataType::ACL_FLOAT16, initC); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHIHostData, biasHIShape, biasHIDeviceAddr, aclDataType::ACL_FLOAT16, biasHI); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHHHostData, biasHHShape, biasHHDeviceAddr, aclDataType::ACL_FLOAT16, biasHH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHIHostData, weightHIShape, weightHIReverseDeviceAddr, aclDataType::ACL_FLOAT16, weightHIReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(weightHHHostData, weightHHShape, weightHHReverseDeviceAddr, aclDataType::ACL_FLOAT16, weightHHReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHIHostData, biasHIShape, biasHIReverseDeviceAddr, aclDataType::ACL_FLOAT16, biasHIReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(biasHHHostData, biasHHShape, biasHHReverseDeviceAddr, aclDataType::ACL_FLOAT16, biasHHReverse); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(outHostData, outShape, outDeviceAddr, aclDataType::ACL_FLOAT16, out); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(outHHostData, outHShape, outHDeviceAddr, aclDataType::ACL_FLOAT16, outH); CHECK_RET(ret ACL_SUCCESS, return ret); ret CreateAclTensor(outCHostData, outCShape, outCDeviceAddr, aclDataType::ACL_FLOAT16, outC); CHECK_RET(ret ACL_SUCCESS, return ret); uint64_t workspaceSize 0; aclOpExecutor* executor nullptr; ret aclnnBidirectionLSTMGetWorkspaceSize(self, initH, initC, weightHI, weightHH, biasHI, biasHH, weightHIReverse, weightHHReverse, biasHIReverse, biasHHReverse, numLayers, isbias, batchFirst, bidirection, out, outH, outC, workspaceSize, executor); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclnnBidirectionLSTMGetWorkspaceSize failed. ERROR: %d\n, ret); return ret); void* workspaceAddr nullptr; if (workspaceSize 0) { ret aclrtMalloc(workspaceAddr, workspaceSize, ACL_MEM_MALLOC_HUGE_FIRST); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(allocate workspace failed. ERROR: %d\n, ret); return ret); } ret aclnnBidirectionLSTM(workspaceAddr, workspaceSize, executor, stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclnnBidirectionLSTM failed. ERROR: %d\n, ret); return ret); ret aclrtSynchronizeStream(stream); CHECK_RET(ret ACL_SUCCESS, LOG_PRINT(aclrtSynchronizeStream failed. ERROR: %d\n, ret); return ret); aclDestroyTensor(self); aclDestroyTensor(weightHI); aclDestroyTensor(weightHH); aclDestroyTensor(initH); aclDestroyTensor(initC); aclDestroyTensor(biasHI); aclDestroyTensor(biasHH); aclDestroyTensor(weightHIReverse); aclDestroyTensor(weightHHReverse); aclDestroyTensor(biasHIReverse); aclDestroyTensor(biasHHReverse); aclDestroyTensor(out); aclDestroyTensor(outH); aclDestroyTensor(outC); aclrtFree(selfDeviceAddr); aclrtFree(weightHIDeviceAddr); aclrtFree(weightHHDeviceAddr); aclrtFree(initHDeviceAddr); aclrtFree(initCDeviceAddr); aclrtFree(biasHIDeviceAddr); aclrtFree(biasHHDeviceAddr); aclrtFree(weightHIReverseDeviceAddr); aclrtFree(weightHHReverseDeviceAddr); aclrtFree(biasHIReverseDeviceAddr); aclrtFree(biasHHReverseDeviceAddr); aclrtFree(outDeviceAddr); aclrtFree(outHDeviceAddr); aclrtFree(outCDeviceAddr); if (workspaceSize 0) { aclrtFree(workspaceAddr); } aclrtDestroyStream(stream); aclrtResetDevice(deviceId); aclFinalize(); return 0; }延伸閱讀算子文檔aclnnBidirectionLSTM.md與本文信息保持一致適合交叉核對參數約束。反向/雙向前向 kernel 實現op_kernel 目錄其中 lstm_bidir_fp16.h 給出了 FP16 雙向前向的底層組織。tiling 與 op 注冊入口bidirection_lstm.h可幫助理解 shape 校驗與 workspace 估算的來源?？删幾g的運行樣例test_aclnn_bidirection_lstm.cpp?！久赓M(fèi)下載鏈接】ops-nn本項目是CANN提供的神經網絡類計算算子庫實現網絡在NPU上加速計算。項目地址: https://gitcode.com/cann/ops-nn創作聲明：本文部分內容由AI輔助生成（AIGC），僅供參考